# benchlink > A bench board for the Dabao (Baochip-1x): one USB-C cable gives a host the Dabao's console, reset, PROG, power and flashing, driven by the `benchlink` CLI. Every page is plain Markdown at the link below. Paths are relative to this file. ## Sheets - [Overview](index.md): One USB-C cable between your computer and a Dabao. - [The board](wiki/hardware.md): What is on the benchlink board, where it is, and how it connects to a Dabao. - [The case](wiki/case.md): The printed case for the bench link board, with the cradle in its bay for a bare Dabao or a socket guide for a Dabao with pin headers, and how it goes together. - [The cradle](wiki/cradle.md): The printed cradle that holds a bare Dabao on the board's spring probes, how it places the Dabao and holds it down, its heights, and how to fit it. - [Getting started](wiki/getting-started.md): Plug in the bench link, install the CLI, seat a Dabao and flash it with one cable. - [Commands](wiki/commands.md): Reference for the benchlink CLI and the text protocol of the board's control port. - [Agent skills](wiki/agent-skills.md): The benchlink agent skill, which teaches a coding agent to power, reset, flash and read a Dabao on the bench link, and how to install and use it. - [Firmware](wiki/firmware.md): What the firmware on the bench link does, and what it saves you compared with a USB-UART adapter and a hand on the buttons. ## Agent skill - [benchlink skill](https://github.com/micovi/benchlink/tree/main/skills/benchlink): an Agent Skills `SKILL.md` for driving the board with the `benchlink` CLI; install with `npx skills add micovi/benchlink --skill benchlink`, or see [Agent skills](wiki/agent-skills.md) ## Order - [Order](order.md): not for sale yet; what would be offered (two builds: `probes` for a bare Dabao, `sockets` for one with pin headers, each also with a case: `probes-case`, `sockets-case`), and how to join the list (a form-encoded POST to /api/waitlist) ## Optional - [Printing the parts yourself](wiki/print-yourself.md): The files, material, print settings, screws and checks for printing the case, the cradle and the socket guide yourself, and how to build the files. - [Build your own with a Pico 2](wiki/diy-pico.md): Build a bench link from a Raspberry Pi Pico 2 on a breadboard, wire it to a Dabao and load the firmware.